PART |
Description |
Maker |
AUIRS2334S AUIRS2334S-15 |
Floating channel designed for bootstrap operation
|
International Rectifier
|
AUIRS2191S-15 |
Floating channel designed for bootstrap operation
|
International Rectifier
|
IRS2011PBF IRS2011PBF-15 |
Floating channel designed for bootstrap operation
|
International Rectifier
|
AUIRS2301S AUIRS2301S-15 |
HALF BRIDGE BASED PRPHL DRVR, PDSO8 Floating channel designed for bootstrap operation
|
International Rectifier
|
IR2235JPBF IR2135JTRPBF IR2133PBF IR2133JSPBF IR22 |
0.5 A 3 CHANNEL, HALF BRDG BASED MOSFET DRIVER, PQCC32 3-PHASE BRIDGE DRIVER Floating channel designed for bootstrap operation Fully operational to 600V or 1200V Tolerant to negative transient voltage dV/dt immune
|
International Rectifier
|
AUIRS2128STR AUIRS2127STR AUIRS21281S AUIRS21271S |
Automotive Grade Floating channel designed for bootstrap operation Automotive Grade
|
International Rectifier
|
IR2010SPBF IR2010STRPBF IR2010PBF |
3 A HALF BRDG BASED MOSFET DRIVER, PDSO16 Floating channel designed for bootstrap operation HIGH AND LOW SIDE DRIVER 3 A HALF BRDG BASED MOSFET DRIVER, PDIP14
|
International Rectifier
|
C1206Y222K5RACTU |
Ceramic, Floating Electrode, FloatingFlexTerm-(CxxxxY), 2200 pF, 10%, 50 V, 1206, X7R, SMD, MLCC, FF-CAP, Floating Electrode
|
Kemet Corporation
|
IRF7309ITRPBF IRF7309IPBF |
30V Dual N- and P- Channel HEXFET Power MOSFET in a SO-8 package designed and qualified for the industrial market
|
International Rectifier
|
TC4403CPA TC4403MJA TC4403 TC4403EPA |
1.5A High-Speed, Floating Load Driver The TC4403 is a modified version of the TC4425 driver, intended to drive floating or isolated loads requiring high-current pulses. The load is intended to be connected between the outputs without other reference to supply or ground. Then, The TC4403 is a modified version of the TC4425 driver, intended to drive floating or isolated loads requiring high-current pulses. ...
|
Microchip Technology Inc. MICROCHIP[Microchip Technology]
|
TC1029EUA TC1029 TC1029EOA TC1029EPA |
The TC1029 is a dual, CMOS operational amplifier designed for low-power applications. It is designed specifically for operation from ... The TC1029 is a dual, CMOS operational amplifier designed for low-power applications. It is designed specifically for operation from a single supply, however, operation from dual supplies is also possible, and the power supply current drai Linear Building Block - Dual Low Power Op Amp
|
MICROCHIP[Microchip Technology]
|
MCP100T-270I_TT MCP100T-300I_TT MCP100T-315I_TT MC |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3 The MCP100 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ... The MCP101 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ... The MCP101 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d The MCP100 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d CPU / System Supervisors Microcontroller Supervisory Circuit with Push-Pull Output
|
MICROCHIP[Microchip Technology] Microchip Technology Inc. Microchip Technology, Inc.
|